Rubber Car Window Seal for 6.4mm x 3mm

This Claytonrite style Rubber Car Window Seal for 6.4mm x 3mm has been commonly used on cars, trucks, and boats for many years, traditionally on Classic British vehicles. The seal sits between the window/windscreen and the frame/body and when the filler strip is inserted down the centre, creates an effective sealing solution.

An ideal, cost effective replacement for many perished seals or for new applications too.

The window and body slots in the seal will look slightly under sized by looking at it but once in situ, they get opened out for the panel/window to fit into. When measuring the old seal to buy a new one, always be sure to measure the window and panel – not the old seal.

Description

• 23.8mm wide x 19mm high
• Fits 6.4mm one side, 3mm the other
• 7mm Web (centre section)
• Very hard wearing and washable
• Flexible and easy to fit
• Easily cut with a sharp knife
• Supplied with filler strip

Uses

Cars, boats, trailers, trucks, horseboxes; any apeture that needs a window.

Top Tip: When fitting the filler insert strip, you may need to use some washing up liquid to ease it into the groove as you move round the seal.

Please take a look at our full range of window seals by clicking here.

Order Code: CL643